本规格说明书描述了东莞市池能电子科技有限公司生产的锂离子动力电池产品性能指标
Battery structure 电池组结构
Contour and Size 外形和尺寸
Description 项目 |
Items 内容 |
Value 数值 |
Thickness of package 厚度 |
T |
66.0mm Max |
Width of packge 宽度 |
W |
86.0mm Max |
Height of packge 高度 |
H |
194.0mm Max |
Battery weight 重量 |
wt |
App:2020g |
Interface type 接口类型 |
Definition 定义 |
Picture 图片 |
Nput to connect with charge 充放电同口 |
Lead(导线):红(Red)+ (UL3135AWG18# 260± 10mm) 黑(Black) - (UL3135AWG18# 260± 10mm) |
![]() |
Interface type 接口类型 |
Definition 定义 |
Picture 图片 |
AC Interface AC 接头 |
/ |
/ |
DC Interface DC 接头 |
/ |
/ |
Input Voltage Range 输入电压 |
/ |
Output Voltage 输出电压 |
/ |
Output Current 输出电流 |
/ |
Current (green change to red)绿灯转红灯电流 |
/ |
Current (red change to green)红灯转绿灯电流 |
/ |
NO. |
Items 项目 |
Specifications 规格 |
|
Battery 电池组 |
1 |
Cell type 电芯型号 |
CN9059156/10000mAh |
2 |
Cell number 电芯数量 |
6pcs (3p3s) |
|
3 |
Max.charge voltage 最大充电电压 |
12.6V |
|
4 |
Nominal voltage 标称电压 |
11.1V |
|
5 |
Nominal capacity 标称容量 |
30Ah @ 0.5C Discharge 0.5C 放电容量为 30Ah |
|
6 |
Charge current 充电电流 |
Standard Charging::6.0A 标准充电:6.0A Rapid charge: 15.0A 快速充电:15.0A |
|
7 |
Battery impedance 电池组内阻 |
≤100mW(Internal resistance measured at AC 1KHz after 50% charge)(半充状态下,测量其 AC 1KHz 下的交流阻抗) |
|
8 |
Charging time 充电时间 |
Standard Charging:6.0 hours(Ref.) 标准: 6.0h Rapid charge: 3.0 hours(Ref.) 快速: 3.0h |
|
9 |
Discharge cut-off voltage 放电截止电压 |
approximate :9.0V 约:9.0V |
|
10 |
Storage temperature 储存温度 |
-20℃~ +45℃ |
|
BMS 保护系 统 |
1 |
Max.charge current 最大充电电流 |
5A |
2 |
Continue discharge current 持续放电电流 |
5A |
|
3 |
Over current discharge current 过流保护值 |
80±10A |
|
4 |
Single cell over charge detection 单节过充保护电压 |
4.25V |
|
5 |
Single cell over discharge detec- tion 单节过放保护电压 |
2.80V |
|
6 |
Short-circuit protection 短路保护 |
Yes 有 |
|
7 |
Condition for the recovery of over current and short-circuit protection 过流和保护后恢复条件 |
Remove load to automatic recovery 移开负载自动恢复 |
|
8 |
Operating temperature 使用温度 |
Charging: 0℃~45℃ 充电: 0℃~45℃ Discharging: -20℃~70℃ 放电: -20℃~70℃ |